1. HOME
  2. Products
  3. TDR (Impedance) Tester
  4. Line Up
  5. E2V6151

E2V6151

E2V6151

High Frequency Probe Unit

High Frequency Probe UnitThe high frequency probe unit is equipped with a rotation mechanism which allows close proximity between probes enables testing of various pad arrangements. High frequency probes such as the ACP series by Form Factor (formerly Cascade Microtech) and many others are supported.

Specifications
AxisE2V6151
(2 axis)
E3V6151
(3 axis)
E4V6151
(4 axis)
Max. Test Area22.8 x 18.9" (580x480mm)
Clamp SystemPneumatic Clamp
Rotate Radius180°
Repeatable Accuracy X-Y±0.16mil (±4µm)
Repeatable Accuracy θ
Air RequirementPressure: 0.5Mpa
Consumption: 0.12ft³/min (3.5ℓ/min)
Power SupplySingle Phase AC200-240V
10A 50/60Hz
Single Phase AC200-240V
12A 50/60Hz
Single Phase AC200-240V
15A 50/60Hz
Weight
*excluding measurement meter
3307lbs.
(1500kg)
3329lbs.
(1510Kg)
3351lbs.
(1520Kg)
DimensionsDimensions
Common System Requirements
System Requirements 1) Control PC & Monitor
2) Meter
  • [ Tektronix ] DSA8300, DSA8200, TDS8000, 11801B/C
  • [ Keysight Technologies (formerly Agilent Technologies) ] E5063A option TDR, E5071C+ENA option TDR, 86100A/B/C, 54750, N5224B
  • [ Teledyne LeCroy ] WaveExpert100H+ST-20
  • [ MicroCraft ] MZPC30/50
Please contact our sales for details. Meters to be purchased separately.
Operating condition · Operating Conditions:
70-75°F (21-24°C), 30-70% relative humidity
No condensation, dust, vibration nor any corrosive gas
· Atmospheric Dew Point: -14°C or below (at 0.7Mpa, dew point is 15°C or below)
· Oil Mist Concentration: 1mg/㎥ (ANR) or below